> For the complete documentation index, see [llms.txt](https://inacks.gitbook.io/is4310-wiki/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://inacks.gitbook.io/is4310-wiki/datasheet/electrical-specifications.md).

# Electrical Specifications

> This page is not the authoritative source for design information. The official [IS4310 datasheet](https://www.inacks.com/is4310) published on [www.inacks.com](http://www.inacks.com) is the authoritative reference: always consult it for the latest information.

## Absolute Maximum Ratings

<table><thead><tr><th>Parameter</th><th width="80">Min</th><th width="80">Max</th><th width="70">Unit</th></tr></thead><tbody><tr><td>Input Voltage – VDD Pin</td><td>-0.3</td><td>4</td><td>V</td></tr><tr><td>Input Voltage – SCL Pin</td><td>-0.3</td><td>5.5</td><td>V</td></tr><tr><td>Input Voltage – SDA Pin</td><td>-0.3</td><td>5.5</td><td>V</td></tr><tr><td>Input Voltage – RX, TX and DIR Pin</td><td>-0.3</td><td>5.5</td><td>V</td></tr><tr><td>Input Voltage – I2CSPD Pin</td><td>-0.3</td><td>4</td><td>V</td></tr><tr><td>Current Sourced/Sunk by any I/O or Control Pin</td><td></td><td>±20</td><td>mA</td></tr><tr><td>Operating Temperature – IS4310-S8-I</td><td>-40</td><td>+85</td><td>ºC</td></tr><tr><td>Operating Temperature – IS4310-S8-E</td><td>-40</td><td>+125</td><td>ºC</td></tr><tr><td>Storage Temperature</td><td>-65</td><td>+150</td><td>ºC</td></tr><tr><td>Electrostatic Discharge (TA = 25ºC) – Human-body model (HBM), Class 1C</td><td>-2000</td><td>+1500</td><td>V</td></tr><tr><td>Electrostatic Discharge (TA = 25ºC) – Charged-device model (CDM), Class C2a</td><td>-500</td><td>+500</td><td>V</td></tr></tbody></table>

Exceeding the specifications outlined in the Absolute Maximum Ratings could potentially lead to irreversible harm to the device. It's important to note that these ratings solely indicate stress limits and don't guarantee the device's functionality under such conditions, or any others not specified in the Recommended Operating Conditions. Prolonged exposure to conditions at or beyond the absolute maximum ratings might compromise the reliability of the device.

## Recommended Operation Conditions

<table><thead><tr><th>Parameter</th><th width="110">Symbol</th><th width="80">Min</th><th width="80">Nom</th><th width="80">Max</th><th width="70">Unit</th></tr></thead><tbody><tr><td>Supply Voltage</td><td>VDD</td><td>2.0</td><td>3.3</td><td>3.6</td><td>V</td></tr><tr><td>Input Voltage at SCL, SDA, RX, TX and DIR Pins</td><td>VI/O-IN</td><td>-0.3</td><td>3.3</td><td>5.5</td><td>V</td></tr><tr><td>Source/Sink Current at SCL, SDA, RX, TX and DIR Pins</td><td>II/O-SS</td><td>-</td><td>-</td><td>±6</td><td>mA</td></tr></tbody></table>

## Electrical Characteristics

<table><thead><tr><th>Parameter</th><th width="110">Symbol</th><th width="80">Min</th><th width="80">Nom</th><th width="80">Max</th><th width="70">Unit</th></tr></thead><tbody><tr><td>Current Consumption (TA = 25ºC)</td><td>IOP</td><td>-</td><td>3.40</td><td>3.90</td><td>mA</td></tr><tr><td>Input Voltage – Logical High-Level</td><td>VIH</td><td>0.7xVDD</td><td>-</td><td>-</td><td>V</td></tr><tr><td>Input Voltage – Logical Low-Level</td><td>VIL</td><td>-</td><td>-</td><td>0.3xVDD</td><td>V</td></tr></tbody></table>

## Flash Memory Cell Characteristics

This memory stores the configuration of the Modbus communications: Slave ID (MBADR), Baud Rate (MBBDR), Parity (MBPAR), and Stop Bits (MBSTP).

<table><thead><tr><th>Parameter</th><th width="80">Min</th><th width="80">Nom</th><th width="80">Max</th><th width="70">Unit</th></tr></thead><tbody><tr><td>Write Cycles</td><td>10k</td><td>-</td><td>-</td><td>Cycles</td></tr><tr><td>Data Retention – TA = 85ºC</td><td>30</td><td>-</td><td>-</td><td>Years</td></tr><tr><td>Data Retention – TA = 105ºC</td><td>15</td><td>-</td><td>-</td><td>Years</td></tr><tr><td>Data Retention – TA = 125ºC</td><td>7</td><td>-</td><td>-</td><td>Years</td></tr><tr><td>Programming time</td><td>-</td><td>-</td><td>25</td><td>ms</td></tr></tbody></table>
