Legal

Independence & Trademark Disclaimer

This company and the products provided herein are developed independently and are not affiliated with, endorsed by, or associated with any official protocol or standardization entity.

All trademarks, names, and references to specific protocols remain the property of their respective owners

Disclaimer

Limited warranty and liability — Information in this document is believed to be accurate and reliable. However, INACKS does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. INACKS takes no responsibility for the content in this document if provided by an information source outside of INACKS.

In no event shall INACKS be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory.

Notwithstanding any damages that customer might incur for any reason whatsoever, INACKS’s aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of INACKS.

Right to make changes — INACKS reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof.

Suitability for use — INACKS products are not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or malfunction of an INACKS product can reasonably be expected to result in personal injury, death or severe property or environmental damage. INACKS and its suppliers accept no liability for inclusion and/or use of INACKS products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk.

Quick reference data — The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding.

Applications — Applications that are described herein for any of these products are for illustrative purposes only. INACKS makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification.

Customers are responsible for the design and operation of their applications and products using INACKS products, and INACKS accepts no liability for any assistance with applications or customer product design. It is customer’s sole responsibility to determine whether the INACKS product is suitable and fit for the customer’s applications and products planned, as well as for the planned application and use of customer’s third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products.

INACKS does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer’s applications or products, or the application or use by customer’s third party customer(s). Customer is responsible for doing all necessary testing for the customer’s applications and products using INACKS products in order to avoid a default of the applications and the products or of the application or use by customer’s third party customer(s). INACKS does not accept any liability in this respect.

Limiting values — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) will cause permanent damage to the device. Limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the Recommended operating conditions section (if present) or the Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device.

Terms and conditions of commercial sale — INACKS products are sold subject to the general terms and conditions of commercial sale, as published at http://www.inacks.com/comercialsaleterms, unless otherwise agreed in a valid written individual agreement. In case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. INACKS hereby expressly objects to applying the customer’s general terms and conditions with regard to the purchase of INACKS products by customer.

No offer to sell or license — Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights.

Export control — This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from competent authorities.

Non-automotive qualified products — This INACKS product is not suitable for automotive use. It is neither qualified nor tested in accordance with automotive testing or application requirements. INACKS accepts no liability for inclusion and/or use of non-automotive qualified products in automotive equipment or applications.

Protocol Guidance Disclaimer: The information provided herein regarding the protocol is intended for guidance purposes only. While INACKS strive to provide accurate and up-to-date information, this content should not be considered a substitute for official protocol documentation. It is the responsibility of the client to consult and adhere to the official protocol documentation when designing or implementing systems based on this protocol.

INACKS make no representations or warranties, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained in this document. INACKS shall not be held liable for any errors, omissions, or inaccuracies in the information or for any user’s reliance on the information.

The client is solely responsible for verifying the suitability and compliance of the provided information with the official protocol standards and for ensuring that their implementation or usage of the protocol meets all required specifications and regulations. Any reliance on the information provided is strictly at the user’s own risk.

Certification and Compliance Disclaimer: Please be advised that the product described herein has not been certified by any competent authority or organization responsible for protocol standards. INACKS do not guarantee that the chip meets any specific protocol compliance or certification standards.

It is the responsibility of the client to ensure that the final product incorporating this product is tested and certified according to the relevant protocol standards before use or commercialization. The certification process may result in the product passing or failing to meet these standards, and the outcome of such certification tests is beyond our control.

INACKS disclaim any liability for non-compliance with protocol standards and certification failures. The client acknowledges and agrees that they bear sole responsibility for any legal, compliance, or technical issues that arise due to the use of this product in their products, including but not limited to the acquisition of necessary protocol certifications.